New homes that are being built today are adhering to fairly strict energy efficiency standards. Although, it isn’t really the way it is for older homes. The most beneficial thing you’re able to do to make your home very energy efficient is usually to add insulation. While it’s not practical for you to attempt it within your walls, it’s possible with blown-in insulation up in your attic. You will see that your property will undoubtedly be cooler during the summer months and warmer in the winter months. If you live in an old house, you’ll find that the insulation applied is probably newspapers.

You will see that insulation technology is amazingly advanced because of our concern for reducing energy and saving the environment. Insulation products have something called an R-value, which is widely used to determine the amount of insulation necessary based on what part of the country you live. In regions which usually get very cold over the winter require insulation with a high R-value while other areas may require just a lower one. Probably the most impressive treatments to reduce your heating bill is blown-in insulation. There are a large number of benefits to having blown-in insulation rather than the traditional fiberglass insulation including energy efficiency, how it can be used and installation.

There are various good points why blown-in insulation would be the way to go, one of them is that it can easily be adjusted. You have the ability to control the actual R-value for insulation by fine-tuning the degree of insulation you use. No matter if your residence demands a high R-value insulation or low R-value insulation, all you need to do is blow the amount required to achieve the proper R-value. Another reason to use blown-in insulation is that its usually manufactured from virgin materials so there’s definitely less chance of getting allergies. Yet another valid reason is that blown-in insulation can create a tighter seal since it can easily fill cracks and pockets of void space. Youll find it isn’t going to take much time to install and all open spaces will be filled consequently making your home more energy efficient.

It will be very straightforward to install blown-in insulation in a house thats newly framed. What you need to do is attach a netting over the studs of the exterior wall, then cut a couple of smallish holes, push the insulation pipe in the hole and fill up the wall cavity. The insulation product will hold fast to the studs and will fill up the interiors of the wall. All you need to complete next is to cover the walls with vapor barrier and drywall, then you have completed the task. To use blow-in ceiling insulation, your first task is to drywall the ceiling, then mechanically blow the insulation from the attic. Its somewhat more difficult with older homes as the wall covering may require to be removed first before installation. The installation procedure doesn’t vary once the wall covering has been stripped. If the dwelling is very old, you could just make a hole in the wall and blow the insulation in, then cover it up.

Even though it gives you a high initial cost, you will save a whole lot of money in the long run. If you need a comfortable and energy efficient household, then getting blown-in insulation is your best option.

Filed under: Home & Garden

Like this post? Subscribe to my RSS feed and get loads more!